The Process Of Asbestos Removal

One of the most popular ways of dealing with asbestos is removal. Though the cost involved in this process is high, it still stands to be an effective method of battling asbestos. The process of asbestos removal is not as simple as it seems to be. In fact it is quite a complicated one. This is why one must make use of the services of a professional company or an asbestos abatement contractor.

The process of removals begins with enclosing the entire work area. For smaller jobs the area can be covered in a plastic glove bag. Alternatively the work area can also be covered with plastic sheets that should be attached to both the ceiling and the floor with duct tape. One should also make sure that there is no furniture in the work area. If there is any, it also must be covered with plastic. If there are any air vents in the work are, they should be covered properly.

Once the work area is enclosed, it needs to be washed properly. After this, an asbestos vacuum popularly known as high-efficiency particulate air or HEPA vacuum is vacuumed. Before the vacuuming starts, great care must be taken to ensure that there are no ventilation ducts or vents in the work area. Special air systems designed for air work should be put to use. These air systems help in reducing the air pressure inside the work area so that no fibers can escape.

Till the time the process of removal is being carried out, no one should be allowed to enter the work without proper equipment. Such equipment includes approved respirators, protective clothing, and training. This because of the use of all this equipment that the ultimate costs of removal turn out to be quite high. 

 another precaution that should be taken to deal with asbestosis to make sure that no one leaves the work area without taking proper steps. This is to ensure that no one carries long asbestos fibers with them. For this purpose equipment or clothing used in the work area must be taken off for clean before leaving the area. One must also make sure that the work site is kept secure so that children are pets cannot enter it. During the process, efforts should be taken to keep asbestos as wet as possible this is done in order to make sure the no fibers into the air. Once that specialist is removed it should be carefully put into two-6 mil (heavy duty) plastic bags. As Pur disposal regulations, these bags are sealed and labeled. The process of asbestos removal is quite complicated and requires a great deal of care and caution. So make sure to hire the best of services for this project. 

Leave a Reply

Close Menu